karbonn flash file
Thursday, September 26, 2013
karbonn smart tab 1 flash file flashing
Karbonn smart Tab 1 Flash Tutorial
How to flash Android Tablet Directly?
Don't worry be happy the solution is here.
Flash file and flashing Download
Step by Step tutorial.
we assume that our tablet is not even having recovery console and no option.
1) So we need to get in "firmware updating mode" for that connect tablet to PC take care tablet should in switch off mode then by pressing POWER + VOLUME DOWN button.
2) Suddenly your PC will detect new hardware Z4770 you can insatll its driver from usb_burn_tools which i have uploaded here:
http://dl.dropbox.com/u/37446115/burn_tools_3.0.16.rar
3) now disconnect the tablet from PC.
4)select your image and boot file with USBbootTool.exe
{only flash these files when you have no other option open if you have warranty up there its preferable to go to karbonn service center or if you are doing for experiments then its OK}
5)now connect table to PC and PRESS POWER + VOLUME DOWN button and progress of updating firmware will automatically start when it will complete 100% it will not give you any notice but take it as update is completed.
6)Now you are back in business.
Some time its very hard to figure it out that actually we have
messed with our Android tablet and even we are not able to reach to
built-in Recovery OR clockwork-recovery mode then what to do?
How to flash Android Tablet Directly?
Don't worry be happy the solution is here.
Flash file and flashing Download
Step by Step tutorial.
we assume that our tablet is not even having recovery console and no option.
1) So we need to get in "firmware updating mode" for that connect tablet to PC take care tablet should in switch off mode then by pressing POWER + VOLUME DOWN button.
2) Suddenly your PC will detect new hardware Z4770 you can insatll its driver from usb_burn_tools which i have uploaded here:
http://dl.dropbox.com/u/37446115/burn_tools_3.0.16.rar
3) now disconnect the tablet from PC.
4)select your image and boot file with USBbootTool.exe
{only flash these files when you have no other option open if you have warranty up there its preferable to go to karbonn service center or if you are doing for experiments then its OK}
5)now connect table to PC and PRESS POWER + VOLUME DOWN button and progress of updating firmware will automatically start when it will complete 100% it will not give you any notice but take it as update is completed.
6)Now you are back in business.
Subscribe to:
Posts (Atom)